Infrared Thermal Imaging

SporeTech
 - a. Mold - Got It? Start Here!
 - b. Mold Panic - FAQ's
 - c. Mold Basics
 - d. Some Mold Facts
 - e. Mold Health Effects
 - f. Mold Prevention
 - g. Mold Remediation
 - h. Chlorine Bleach and Mold
 - i. Mold and Real Estate
 - j. Construction And Mold
 - k. Mold Litigation
 - l. Physicians Mold Info
 - m. Mold In The News
 - n. Infrared Finds Moisture & Mold!


Newsletter Update?
Enter In Your Email!

Mold and Mildew Inspectors at Spore°Tech Mold Investigations, LLC, Louisville, KY do not recommend the use of chlorine bleach in mold remediation processes.

Chlorine Bleach and Mold Clean Up
(Let's Set the Record Straight!)

The Myth.
A myth exists concerning the use and “effectiveness” of chlorine bleach (sodium hypochlorite) in the remediation of a mold problem. Mold remediation involves the removal and or clean up and restoration of mold contaminated building materials.

Opposing Views and Confusion.
Chlorine bleach, commonly referred to as laundry bleach, is generally perceived to be an “accepted and answer-all” biocide to abate mold in the remediation processes. Well-intentioned recommendations of health departments and other state and local agencies are perpetuating that belief. The Occupational Health and Safety Administration (OSHA) who once recommended using clorine bleach for mold abatement was the first federal agency to stop recommending the use of liquid bleach in mold remediation. Subsequently, The Environmental Protection Agency  wrote-out/edited their A Brief Guide to Mold, Moisture and Your Home (EPA 402-k-02-003) to exclude their once recommended use of  bleach as a mold clean-up agent.

Does Bleach Really Kill Mold?
Will chlorine bleach kill mold or not—yes or no? The answer is yes, but with a caveat. That answer comes from The Clorox Company, Oakland CA, manufacturer and distributor of Ultra Clorox® Regular Bleach. The company’s correspondence to Spore°Tech Mold Investigations, LLC stated that their Tech Center studies supported by independent laboratories show that “…3/4 cup of Clorox liquid bleach per gallon of water will be effective on hard, non-porous surfaces against… Aspergillus niger and Trichophyton mentagrophytes (Athlete’s Foot Fungus)”. Whether or not chlorine bleach kills other molds and fungi, the company did not say. The “hard, non-porous surfaces” part of the sentence is a caveat. Mold remediation involves the need to disinfect wood and wood-based building materials, all of which are porous materials. Thus, chlorine bleach should not be used in mold remediation as confirmed by OSHA’s and EPA's updated recommendations and suggested guidelines. The use of bleach as a mold disinfectant is best left to kitchen and bathroom countertops, tubs and shower glass, etc.

Why Chlorine Bleach is NOT Recommended for Mold Remediation.
Clorine bleach is corrosive and that fact is stated on the product label (not to mention the exposure hazards of dioxins). Yet the properties of chlorine bleach prevent it from “soaking into” wood-based building materials to get at the deeply embedded mycelia (roots) of mold. The object to killing mold is to kill its “roots”.  Reputable mold remediation contractors use appropriate products that effectively disinfect properly scrubbed and cleaned salvageable mold infected wood products. Beware of any mold inspector, mold remediation contractor or other individual that recommends or uses chlorine bleach for mold clean up on wood-based building materials.

Chlorine Bleach Is Active Ingredient in New Mold & Mildew Products.
The appearance of new mold and mildew household products on store shelves is on the rise. Most are dilute solutions of laundry bleach. The labels on these mold and mildew products state that they are for use on (again) hard, non-porous surfaces and not for wood-based materials. Instructions where not to apply the products are varied. A few examples where the branded products should not be applied include wood or painted surfaces, aluminum products, metal (including stainless steel), faucets, marble, natural stone, and, of course, carpeting, fabrics and paper. One commercial mold and mildew stain remover even specifically states it should not be applied to porcelain or metal without immediate rinsing with water and that the product isn’t recommended for use on formica or vinyl.

Caveat Emptor!
Before purchasing a mold and mildew product, read and fully understand the advertised purpose of that product — and correctly follow the use instructions of a purchased product. The labeling claims on these new products can be confusing — some say their product is a mold and mildew remover while another says their product is a mildew stain remover and yet others make similar 'ambiguous' claims. Make double sure that the product satisfies your intended need on the surface to which it is to be applied. If your intention is to kill mold, make sure the product does exactly that and follow the directions for usage. Consumers may find that mixing their own diluted bleach solution will achieve the same results when used on surfaces recommended by manufacturers of commericial mold and mildew cleaning products — keep in mind that the use of chlorine bleach is not for use on mold infected wood products including wall board, ceiling tiles, wall studs, fabric, paper products, etc.
 
Conclusion.
Laundry bleach is not an effective mold killing agent for wood-based building materials and NOT EFFECTIVE  in the mold remediation process. OSHA is the first federal agency to announce a departure from the use of chlorine bleach in mold remediation. In time, other federal, state and other public safety agencies are expected to follow OSHA’s lead.  The public should be aware, however, that a chlorine bleach solution IS an effective sanitizing product that kills mold on hard non porous surfaces and neutralizes indoor mold allergens that trigger allergies.

CAUTION: DO NOT MIX CHLORINE BLEACH WITH OTHER HOUSEHOLD CLEANING AGENTS. DOING SO CAN CAUSE SERIOUS HARM TO HUMAN HEALTH AND EVEN DEATH. For example, mixing chlorine bleach with cleaning products that contain ammonia or acid (vinegar, as one example) releases chlorine or chloramines, gases which are highly TOXIC.

 

(Updated 06/06/07)

A mold and mildew inspector at Spore°Tech Mold Investigation, LLC, Louisville, Kentucky is available for property mold assessments, mold testing and sampling to determine levels of potential mold contamination and corrective actions. Some mold remediation can be successfully completed by the property owner. Detailed information can be obtained by contacting Spore°Tech Mold Investigations, LLC at 502.262.2022 or info@spore-tech.com .

 

Site Search | Newsletter